Repair windows, shutters, trim, doors, jambs, railings, decks, fascia as needed in kind, and painting in kind, as per vcc approval.

-to remove plaster as needed from st. Peter elevation in order to assess existing cracks in plaster. Note: structural engineers assessment pending.

To repair deteriorated stucco and brick veneer at the arched opening on the st. Peter elevation near the corner of st. Peter & royal per specifications outlined in structural engineers letter received 05/13/14. Repair stucco & remove vegetation from banded cornice above ground-floor level using vcc approved stucco formula (below) in order to prevent moisture infiltration. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure, including tooled and scored stucco to match detail in existing adjacent stucco. All mortar & stucco to match the following vcc approved formulas: mortar: no more than 1 part portland cement, 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted, as quality control is not consistent. Stucco: base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6

1. To repair/replace transom to match previously existing damaged transom with colored glazing, lite-division & muntin profiles per drawings submitted 06/26/14 & stamped vcc approved 07/09/14.

To repair deteriorated stucco and brick veneer at the arched opening on the st. Peter elevation near the corner of st. Peter & royal per specifications outlined in structural engineers letter received 05 13 14. Repair stucco & remove vegetation from banded cornice above ground-floor level using vcc approved stucco formula (below) in order to prevent moisture infiltration. All repair replacement work shall match existing in color, size, material, detail, profile and exposure, including tooled and scored stucco to match detail in existing adjacent stucco. All mortar & stucco to match the following vcc approved formulas: mortar: no more than 1 part portland cement, 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted, as quality control is not consistent. Stucco: base coat consists of 2 coats, doubled up work of 5 8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6

1. To repair replace transom to match previously existing damaged transom with colored glazing, lite-division & muntin profiles per drawings submitted 06 26 14 & stamped vcc approved 07 09 14.